QAQC Tank Inspector

QAQC Tank Inspector page is loaded## QAQC Tank Inspectorlocations :

Duba, Saudi Arabiatime type :

Full timeposted on :

今天刊登time left to apply :

結束日期︰2025年9月30日 (應徵期限︰超過 30 天)job requisition id :

JR- Air Products 的宏圖是將人們聚集在一起，重新思考世界的可能性，並共同協作且創造出創新解決方案，以應對全球能源和環境永續發展挑戰 成為全球最安全、最多樣化且獲利最多的工業氣體公司，與我們一同迎接明日建設，一同成長。

• 重新構想無限可能
• POSITION SUMMARY
• The QAQC Inspector - Tanks is responsible to ensure that all field Tanks construction and commissioning activities are performed in accordance with the provisions of the Construction Quality Plan and AP Engineering Requirements.
• NATURE AND SCOPE
• Safety & Quality are very important aspect in all project phases,Travel might require for this position both short & long business trips as needed.
• DIMENSIONS :
• Coordinating site construction Engineers / QC Tanks Inspectors of EPC Sub-contractors and Client.
• Working in a Mega size project
• Multi- project Type : EPC Oil & Gas, Petrochemical, Infrastructure Plants
• PRINCIPAL ACCOUNTABILITIES
• An approved QAQC Inspector – Tanks has the responsibility and commensurate authority to accomplish the following duties :
• Reporting to the QAQC Lead - Tanks.
• Monitoring and implementation of QMS Procedures, PQP, ITP & method statements and reporting deviations from management system / contractual requirements of the projects.
• Verifying that all necessary inspections and tests, as required of the project and statutory regulations, are carried out and appropriate records are updated and maintained.
• Coordinating quality activities with subcontractors and any other individual parties who may be working on the same site.
• Coordination with clients / third party, in accordance with approved ITP, for agreed witness inspections & tests.
• Ensuring close-out of all snags / punch-points within the time frame agreed with the client.
• Reviewing and performing material receiving inspection as per company and client requirements, applicable standards / specifications etc.
• Performing assigned in-process and final products inspection and tests.
• Monitor ongoing construction activities related to Tanks and associated piping, steel structure etc.
• Ensuring all the inspection & test reports of completed inspections activities are signed-off, systematically stored with scanned copies and records are easily retrievable.
• Ensuring all equipment’s, tools and materials meet with the project quality requirements and that personnel have been adequately trained to use them safely.
• Identification of non-calibrated equipment’s and informing Subcontractor QC for expediting arrangements with Calibration agencies for timely calibration of the equipment’s.
• Liaise with client representative concerning quality matters on site.
• To be conversant with the company QHSE procedures & policies and ensure that all the people on the site observe and implement them.
• Identifying near miss and nonconformities in materials, products, processes, procedures and reporting the near miss / nonconformities in the near miss / nonconformity report.
• Verification of implementation of corrective & preventive actions against the nonconformities and reporting results to line managers.
• Monitor the progressive preparation of final quality dossiers which should be concurrent and maintaining backups of completed quality dossiers.
• Submit weekly report and requested information / statistics to QAQC Lead -Tanks.
• Liaise with QAQC Lead - Tanks for all aspects of quality.
• MINIMUM REQUIREMENTS AND QUALIFICATIONS
• Degree / Diploma in Mechanical Engineering
• Saudi Aramco CBT Passed & project Approval.
• Have a working knowledge of relevant Tanks related international codes including API 620 / 650 / 653, AWWA D100, ASME Sec V, and IX, ANSI B31.3 / 4 / 8, NACE, and AWS D1.1, and testing equipment including PMI test equipment required for the inspection of mechanical commodities including pipes, fittings, valves, structural steel, and fasteners.
• Have experience of tanks construction, piping and steelwork installation and associated trades e.g, insulation, painting etc.
• Working experience in LNG, Ammonia, LIN, LOX Tanks is an advantage.
• 15 years of experience in Construction on industrial gases, oil & gas or related industry projects which should be construction site based.
• Organized, disciplined, able to perform under pressure and manage multiple priorities and parallel tasks
• Strong Microsoft software skills, particularly Excel
• Report writing skills
• Experience of working in a multicultural project team
• Middle East project experience
• Desirable Qualifications, Experience and Skills
• API 653, CSWIP 3.1 / 3.2 Certified.
• Saudi Aramco CBT Passed & Approved.
• License Professional Mechanical EngineerAir Products 是全球最大的氫氣生產商，擁有超過 80 年的工業氣體生產經驗。作為氫氣和工業氣體專家，Air Products 提供安全的端到端解決方案，大規模投資真實和潔淨的能源專案，並推動產業向前邁進，為未來創造更潔淨的環境。Air Products 將工作環境安全性放在首位，其文化中蘊含多元性和包容性，因此每位員工都能在 Air Products 找到歸屬感和其自身的重要性。欲瞭解更多資訊，請造訪 About Air Products 頁面。Register for Job Alerts

Follow these simple steps :

1) Register by clicking ‘Join our Talent Network’ at the top of this page, where you can create your account.

2) Sign up for ‘job alerts’ to stay informed of vacancies based on your skillset and location preferences.More than 23,000 passionate, talented and committed employees from diverse backgrounds are driven by Air Products’ higher purpose to create innovative solutions that benefit the environment, enhance sustainability and reimagine what's possible to address the challenges facing customers, communities, and the world. #J-18808-Ljbffr