Talent.com
This job offer is not available in your country.
Field Engineer Close-in Weapons System (CIWS)

Field Engineer Close-in Weapons System (CIWS)

Basic Engineering Concepts & Technologies Inc DBA BecTech IncAl Jubayl, Saudi Arabia
16 hours ago
Job description

Overview

BecTech is looking for two qualified field engineers with Block 1B2 CIWS experience to groom gun mounts for the Royal Saudi Navy. Specific duties include, but are not limited to assisting the Ship Repair Force (SRF) to groom and maintain the CIWS as described below. Responsibilities

Follow the Planned Maintenance System Maintenance Index Page (MIP) 7112 / 1B2 and the CIWS technical manuals, TW-221-B2-MMO-010 (IETM). MIP 7112 / MRC Q-12. Remove, Clean, Inspect, and Re-Install Ammunition Handling System Components. MIP 7112 / MRC S-2R. Remove, Disassemble, Clean, Inspect, Lubricate, Re-Assemble, and Re-Install Gun. Troubleshoot and repair CASREPTS as requested. Test the CIWS system through all modes to achieve a "GO" status. Perform CIWS System Technical Assessment (PMS AP-1). Note : all GAHS work will be performed with dummy ammunition only. Perform System Operability Tests (SOTS), Periodic System Operability Tests (PSOTS), and Fault Isolation Tests (FITS). Test transmitter output and ensure a "GO" status. Tune the Klystron as required. Clean and lubricate the Gun Ammunition Handling System (GAHS). Inspect shock isolators. Inspect condition of door gaskets, seals, and weatherproofing and determine if replacement is necessary. Inspect the Environmental Control Group (ECG). Test safety devices. Perform troubleshooting and repairs necessary to accomplish the tasks above. Travel and Work Location

This opportunity requires travel to Saudi Arabia a minimum of twice per year for 24 days. Travel, lodging, per diem will be provided. Work will be performed under an FMS case. Candidates must be technically qualified in OEM procedures and requirements. Prior FMS and OEM experience preferred. Required Skills

US Citizenship with Active Secret Clearance 12+ years of experience Shipboard experience to include operations, maintenance, test, system installation, of Block 1B2 CIWS Desired Skills

OEM Technical certification Prior experience with FMS support Travel Frequency

Position requires travel to Saudi Arabian a minimum of two times per year with a potential to increase to once per quarter over three years. EEO / Compliance

All applicants selected will be subject to a background investigation.

#J-18808-Ljbffr

Create a job alert for this search

Field Engineer • Al Jubayl, Saudi Arabia